Home  |  Products  |  Online Demo  |  Telecom Solution  |  About Us  |  Contact us  |  Customer service center  |  Email Us  |  Shop Online

 
 

Product Name: CAMit Tgc




General Features
Special Features for eCAMit T
Application Software
Specifications of eCAMit T


Product Description - CAMit Tgc

CAMit Tgc is an IP camera connected to GPRS or CDMA modems for Internet. The hardware is exactly the same as our IP camera, eCAMit T without the Ethernet port. The GPRS or CDMA modems are connected to the camera through a serial cable. One could dial to the camera with correct caller ID to wakeup the camera to log onto our free mobile DDNS for you to view from remote PC, PDA, Smartphone or Java phone. With our remote camera service (RCS), the camera will send the image to our RCS servers and send you SMS for warning upon motion detection or sensor triggered.

General Features

The camera uses our proprietary worldwide free IP gatekeeper for dynamic IP after connected to Internet via GPRS or CDMA modems. They are specially designed for managing and marketing your business where no broadband is available. It could also be scheduled to enter into security mode. The general features are:

  • Connect to Internet via external GPRS or CDMA modems
  • Wake up by Caller ID, Motion Detection or External Sensors
  • 48 Zone selectable motion detection
  • Built in real time clock for weekly and daily schedule for security mode and recording
  • Encrypted data
  • View from PC, Pocket PC, Smartphone and Java phone
  • Optional Remote Camera Services for you to generate monthly recurring revenue

Special Feature for CAMit Tgc

  • One trigger-in and One trigger-out
  • Daisy chained to powerBox for turn on/off the AC power

Application Software

  • Utility Program for ISP parameter setup
  • Use Internet Explorer to view the cameras
  • Use eCAMit T Java Midlet for the MIDP2.0 Java phones to view, activate, deactivate the camera peer to peer without the data going through a server
  • Use eCAMit T AP for Pocket PC to view the cameras peer to peer without the data going through a server
  • Windows Application Software (eCAMit Deluxe AP) Features:
    • Schedule security mode daily or weekly
    • Schedule auto-recording daily or weekly
    • Snapshot
    • Replay recorded images
    • Up to sixteen cameras display on Windows based Application Software

Specifications of CAMit Tgc

  • Power consumption: 5V DC, ~390 mA still, ~420 mA rotating
  • Pan Speed: 21 to 10.5 degrees/second
  • Cable Connections:
    • RJ12 connector for 5V DC/90~240V AC
    • DB15 for RS232 for external GPRS or CDMA modems and for parameters setup through a Windows based software

  • Transmission Speed depends on ISP connection speed. Assuming 33.6kbps upload:
    • High Resolution (640x480): ~0.125 frames/second
    • Medium Resolution (320x240): ~0.5 frames/second
    • Low Resolution (160x120): 1~2 frames/second

  • Camera Specification:
  • CMOS Camera support Specification:
    • 300K pixels, 1/3
    • S/N Ratio: > 48dB
    • Gamma Correction: 0.45
    • Min. Illumination: <2.5 lux @ f2.0
    • Default Lens: (others are available as optional Lens.)
    • (Ref: 3Jtech Technical Notes: Relation between Lens Angles, Distance and Identifiable Target)
    • Focal Length 6mm
    • Back Focal Length 5.8mm
    • Aperture F 2
    • Angle of View (DIA) 70o
  • Operation Environment:
    • Temperature: 0o C~55o C Humidity: 85% relative at 25 o C
  • Weight: 150g
  • Dimension: 10cm x 13.5cm x 15cm
  • Trigger in: NO or NC (Software Selectable), or 5V level trigger
  • Motion detection sensitivity: High, Medium, and Low
  • Motion Detection Zones: 48
  • Trigger out: Low to High TTL Level 5V
  • Internet Protocol for IP connection: UDP

*Specifications are subject to change without notice
 
   



© copyright of 3JTech Co., Ltd. (also doing business as A3J Engineering Inc.)