Home  |  Products  |  Online Demo  |  Telecom Solution  |  About Us  |  Contact us  |  Customer service center  |  Email Us  |  Shop Online

 
 

Product Name: eCAMit T




General Features
Special Features for eCAMit T
Application Software
Specifications of eCAMit T
Packing List
Quick Installation Guide


Product Description - eCAMit T

eCAMit T is an IP Camera with a CMOS image sensor. It is a stand alone camera with Internet accessibility using dynamic IP. Just connect it to the Ethernet port of the network switch or router. When the camera is triggered by the 48 zone motion detection or external device like the contact sensor, it will send emails with JPEG attachments to you. You could also view the site and turn on/off your appliances through the camera from anywhere in the world as long as you could connect to the internet with your PC, Pocket PC, Smartphone or MIPD2.0 Mobile phone.

General Features

The camera uses our proprietary worldwide free IP gatekeeper for dynamic IP to make the cameras plug and play. There would be no setup needed between the router and the cameras. They are specially designed for managing and marketing your business and could also be scheduled to enter into security mode or activate the security mode remotely by mobile phone. The general features are:

  • 48 Zone selectable motion detection
  • Built in real time clock for scheduling security mode, recording
  • Patented Plug and Play for multiple cameras using dynamic IP
  • Encrypted data
  • View from PC, Pocket PC, Smartphone and Java phone
  • Optional Remote Camera Services for you to generate monthly recurring revenue
  • Send e-mail upon motion detection or optional external trigger, e.g.: contact sensor

Special Features for eCAMit T:

  • One trigger-in and One trigger- out
  • Daisy chained to powerBox for turn on/off the AC power
  • Optional 8 additional trigger in

Application Software

  • Use a PC with Windows Application Software or Internet Explorer to view the cameras peer to peer without the data going through a server.
  • Use eCAMit T Java Midlet for the MIDP2.0 Java phones to view, activate, deactivate the camera peer to peer without the data going through a server.
  • Use eCAMit T AP for Pocket PC to view the cameras peer to peer without the data going through a server.
  • Windows Application Software ( eCAMit Deluxe AP ) Features:

  •    i. Schedule security mode daily or weekly
       ii. Schedule auto-recording daily or weekly
       iii. Snapshot
       iv. Replay recorded images
       v. Up to sixteen cameras display on Windows based Application Software

Specifications of eCAMit T:

  • Power consumption: 5V DC, ~270mA
  • Cable Connections:
  • DB15 for RS232 auto baud rate up to 921.6 kbps, 8,n ,1. The serial port is used for parameters setup through a Windows based software,. It could also be used as a serial camera through 3JTech`s extended Command Sets communication for speeds up to 921.6 kbps. The port use 15 pins since eight of the pins are used for additional 8 trigger-in IOs.
  • RJ45 for Ethernet 10BaseT
  • RJ12 connector for 5V DC/90~240V AC adaptor and trigger in/out
  • Trigger in: NO or NC (Software Selectable) or 5V level trigger
  • Motion detection sensitivity: High, Medium, and Low
  • Motion Detection Zones: 48
  • Trigger out: Low to High TTL Level 5V
  • Internet Protocol for IP connection: UDP
  • UDP Port Used: any plus the last field of the IP (firewall, if any, has to allow these ports to go through)
  • Transmission Speed:

  •       High Resolution (640x480): maximum 6 frames/second
          Medium Resolution (320x240): maximum 15 frames/second
          Low Resolution (160x120): maximum 25 frames/second
  • Camera Specification:
          CMOS Camera support Specification:
          300K pixels, 1/3?
          S/N Ratio: > 48dB
          Gamma Correction: 0.45
          Min. Illumination: <2.5 lux @ f2.0
          Default Lens: (others are available as optional Lens .)
          ( Ref: 3JTech Technical Notes: Relation between Lens Angles, Distance and Identifiable Target ) (only for registered viewers)
          Focal Length 3.6mm
          Back Focal Length 5.8mm
          Aperture F 2
          Angle of View (DIA) 92o
  • Operation Environment:

  •       Temperature: 0oC~55oC Humidity: 85% relative at 25oC
  • Weight: 150g
  • Dimension of Main Body: 10cm x 6.5cm x 5 cm


*Specifications are subject to change without notice

 
   



© copyright of 3JTech Co., Ltd. (also doing business as A3J Engineering Inc.)