Home  |  Products  |  Online Demo  |  Telecom Solution  |  About Us  |  Contact us  |  Customer service center  |  Email Us  |  Shop Online

 
 

Product Description - netCAMit Secuirty DIY Package

netCAMit is a color network camera with built-in Plug & Play function by 3JTech. Just plug netCAMit directly to a RJ45 Ethernet port of your router, install the software and you will be able to view camera sites in real-time from anywhere in the world. The package comes with the following accessories for customers to build their own security:

    1)netCAMit and its power adaptor
    2)5 meter CAT5 cable
    3)contact sensor with 15 meter cable
    4)a powerBox to turn on/off appliance from the remote site
    5)an universal power strip with three plugs (optional)

System Configuration for neCAMit DIY Package:
Application of neCAMit DIY Package with wifiRouter and wifiAdaptor:
Comparison List of Plug & Play IP Cameras with Most of the Conventional Ones:
 

Conventional IP Camera

netCAMit

To view the IP Camera connected to a Non-Fixed IP from Internet Apply for Dynamic Domain Name Service (DDNS) Search via Unique ID
Router Setup Need Setup Auto
Multiple Cameras using Router Setup DDNS and Router for each Camera Auto
Maximum Cameras Viewed on a Screen Varies 16
Arm/ Disarm by Schedule NA Daily or Weekly
Arm/ Disarm by Key Flop NA Daily or Weekly
Trigger-in from Sensors Wires Wired
Trigger-out IO Varies 1 by wire
Control AC Appliance through Camera Remotely NA Yes
Recording upon Triggered or Scheduled NA To local PC or Remote PC with Fixed IP
Mounting Method Varies Desktop, Ceiling and Wall Mounts

Physical Specification:
  • DC 5V 420mA
  • Housing dimension: 1 11/16 x 2 1/16 x 3 3/4 inches. (Without holder)
  • Holder dimension: 2 3/8 x 2 3/16 x 1 5/8 inches
  • Weight: 3.5 ounces. (Without the stand)
Lens Specification:
  • Default lens: (others are available as optional Lens.)
  • Focal length: 3.6mm
  • Aperture: F2.0
  • Angle of view (DIA): ~90degrees
Image Sensor Specification:
  • 1/4 " CMOS sensor (Micron MT9V011 )
  • VGA, QVGA, QCIF pixel size
  • Max. frame rate: 15 fps progressive
  • Dynamic range: 72dB
  • Sensitivity: 1.0 V/LUX-Sec
Connectors:
  • RJ45 (10/100M)
  • RJ22 for DC5V and one each for trigger-in and trigger-out
* If you don't have a router, you can
    1)Setup the camera using PPPoE or Static IP,
       Or
    2)Get a new router and setup its WAN connection.
*Specifications are subject to change without notice
 
   



© copyright of 3JTech Co., Ltd. (also doing business as A3J Engineering Inc.)