Home  |  Products  |  Online Demo  |  Telecom Solution  |  About Us  |  Contact us  |  Customer service center  |  Email Us  |  Shop Online

 
 


Product Description - netCAMit_EoP

netCAMit_EoP
is a Plug & Play color network camera by 3JTech with built-in EoP (Ethernet Over Power line), Ethernet software stacks and protocols. Just plug the power line into the power connector of netCAMit_EoP directly to connect remotely with another EoP adaptor located in the same power loop via the power line as a network, and you will be able to view the camera sites in real time from anywhere in the world with Internet access. Through our RCS (Remote Camera Service) system, you will also be able to control the camera from any PC/Notebook/Mobile phone/PDA phone over the web browser.

netCAMit_EoP supports wireless RFIO connection with the wireless RF Sensor to be able to trigger the camera as a security alarm. netCAMit_EoP can send the triggered event by means of SMS, MMS and/or e-mail via RCS system to authorized users. It can also record triggered images to the RCS system at the same time.

Hardware Specification:
   CPU ARM7 32bit RISC CPU
   SDRAM 16 MB
   Flash ROM 2 MB
   OS Linux 2.4 kernel
   Ethernet RJ45, auto-sensing 10/100 Base-T
   DC 5V 420mA
   Dimension: 16.1 x 7.7 x 4.8cm
   Weight: 320gm

Image Sensor Specification:
   1/5 " CMOS sensor (OV 7660)
   Sensitivity: 1.0 V/LUX-Sec
   Video Format: JPEG/MJPEG
   Frame Rate: 30fps@QVGA , 15fps@VGA
   Video Resolution: 176x144, 320x240, 640x480
   Light Frequency: 50Hz, 60Hz
   Adjustable Brightness / Contrast / Saturation

EoP:
   Home Plug 1.0 compatible up to 85 Mbps line speed
   Support Ethernet 10/100Mbps Auto MDI/MDIX
   Support IEEE 802.3 , IEEE 802.3u Fast Ethernet
   Power Supply 100/220 V AC

Optional Security Accessories:
RF Sensor
   Built-in 3.6V/2100mAH battery
   Trigger input contact for alarm sensor from wired to wireless
   LED status indication
   ON/OFF switch
   Working frequency: 433 MHz
    (programmable 315 MHz, 868 MHz and 915 MHz)
   Power consumption:
    TX: 28.8 mA at +10 dBm output power RX: 15.6 mA
   High sensitivity (-110 dBm at 1.2 kbps)

RF Flip
   Built-in 3V/200mAH battery
   Enable RFIO function button
   Disable RFIO function button
   LED status indication
   Working frequency: 433 MHz
    (programmable 315Mhz, 868Mhz and 915 MHz)
   Power consumption:
    TX: 28.8 mA at +10 dBm output power RX: 15.6 mA
   High sensitivity (-110 dBm at 1.2 kbps)

RFIO
   Working frequency: 433 MHz.
    (programmable 315Mhz, 868Mhz and 915 MHz)
   Power consumption:
    TX: 28.8 mA at +10 dBm output power RX: 15.6 mA
   High sensitivity (-110 dBm at 1.2 kbps)

*Specifications are subject to change without notice.

 
   



© copyright of 3JTech Co., Ltd. (also doing business as A3J Engineering Inc.)