Home  |  Products  |  Online Demo  |  Telecom Solution  |  About Us  |  Contact us  |  Customer service center  |  Email Us  |  Shop Online

 
 

 

product description - netCAMit

netCAMit is a color network camera with built-in Plug & Play function by 3JTech. Just plug netCAMit directly to a RJ45 Ethernet port of your router as well as install the software, and you will be able to view camera sites in real time from anywhere in the world.

netCAMit supports wireless RFIO to connect with wireless RF Sensor to trigger camera as security alarm. netCAMit camera can send the triggered event by means of SMS, MMS and/or e-mail via RCS system to authorized users. It can also record triggered images to RCS system at the same time.


Comparison List of Plug & Play IP Cameras with Most of the Conventional Ones:

To view the IP Camera connected to a Non-Fixed IP from Internet

Apply for Dynamic Domain Name Service (DDNS)

Search via Unique ID

Router Setup

Need Setup

Auto

Multiple Cameras using Router

Setup DDNS and Router for each Camera

Auto

Maximum Cameras Viewed on a Screen

Varies

16

Arm/ Disarm by Schedule

NA

Daily or Weekly (Optional Accessory Package Needed)

Arm/ Disarm by Key Flop

NA

Daily or Weekly (Optional Accessory Package Needed)

Trigger-in from Sensors

Wires

Wired or Wireless (Optional Accessory Package Needed)

Maximum Trigger-in IO per Camera

Varies

4 by RF, 1 by wire (Optional Accessory Package Needed)

Control AC Appliance through Camera Remotely

NA

Yes (Optional Accessory Package Needed)

Recording upon Triggered or Scheduled

NA

To local PC or Remote PC with Fixed IP

Mounting Method

Varies

Desktop, Ceiling and Wall Mounts


Application of netCAMit with wifiRouter and wifiAdaptor:

Retail Box for netCAMit:

Physical Specification:
. DC 5V 420mA
. Housing dimension: 1 11/16 x 2 1/16 x 3 3/4 inches. (Without holder)
. Holder dimension: 2 3/8 x 2 3/16 x 1 5/8 inches
. Weight: 3.5 ounces. (Without the stand)

Lens Specification:
. Default lens: (others are available as optional Lens.)
. Focal length: 3.6mm
. Aperture: F2.0
. Angle of view (DIA): ~60o

Image Sensor Specification:
. 1/5 " CMOS sensor (OV 7660)
. VGA, QVGA, QCIF pixel size
. Max. frame rate: 15 fps progressive
. Dynamic range: 72dB
. Sensitivity: 1.0 V/LUX-Sec

Connectors:
. RJ45 (10/100M)
. RJ22 for DC5V and one each for trigger-in and trigger-out

* If you don't have a router, you can
1) Setup the camera using PPPoE or Static IP,
     Or
2) Get a new router and setup its WAN connection.

Optional Security Setup with Purchase of Additional Accessories:
. Wired or Wireless Triggering
. Weekly or Daily Schedule for Arm and Disarm
. RFIO and RF Sensor with Two Way Confirmation
. Over 10 Yrs Battery Life for RFSensor under Optimized Usage

Retail Box for Security Accessories for netCAMit:

Optional Security Accessories:
RF Sensor
. Built-in 3.6V/2100mAH battery.
. Trigger input contact for alarm sensor from wire to wireless .
. LED status indication
. ON/OFF switch.
. Working frequency:433 Mhz.
  ( programmable 315Mhz,868Mhz and 915 Mhz)
. Power consumption: TX: 28.8 mA at +10 dBm output power RX:15.6 mA
. High sensitivity (-110 dBm at 1.2 kbps).

RF Flip
. Built-in 3V/200mAH battery.
. Enable RFIO function button.
. Disable RFIO function button.
. LED status indication
. Working frequency:433 Mhz.
(programmable 315Mhz,868Mhz and 915 Mhz)
. Power consumption  TX: 28.8 mA at +10 dBm output power RX:15.6 mA
. High sensitivity (-110 dBm at 1.2 kbps).

RFIO
. Working frequency:433 Mhz.
( programmable 315Mhz,868Mhz and 915 Mhz)
. Power consumption TX: 28.8 mA at +10 dBm output power  RX:15.6 mA
. High sensitivity (-110 dBm at 1.2 kbps).

*Specifications are subject to change without notice .

 
   



© copyright of 3JTech Co., Ltd. (also doing business as A3J Engineering Inc.)