Product Description for pan_CAMit IIT pan_CAMit IIT is a IP camera with built-in modem and 360o rotating. The hardware is exactly the same as pan_CAMit I+. The firmware is different in a way that it dials into Internet Service Provider and turns itself into an IP camera in stead of point to point connection. The camera is connected to TeleOn II so that you could dial in with correct caller ID to trigger the camera to dial into internet for you to view from remote PC, PDA, Smartphone or Java phone. When the camera is triggered by the motion detection, it will dial to your remote PC and record the image. You could also view the site and rotate the camera once the camera is online. General Features •  Dialup to ISP with its built-in V.90 modem •  Wake up by Caller ID, Motion Detection or External Sensors •  48 Zone selectable motion detection •  Built in real time clock for weekly and daily schedule for security mode and recording •  Encrypted data •  View from PC, Pocket PC, Smartphone and Java phone • Optional Remote Camera Services for you to generate monthly recurring revenue • 360 degree rotate Application Software 1) Utility Program for ISP parameter setup 2) Use Internet Explorer to view the cameras 3) Use eCAMit T Java Midlet for the MIDP2.0 Java phones to view, activate, deactivate the camera peer to peer without the data going through a server 4) Windows Application Software (eCAMit Deluxe AP) Features: •  Schedule security mode daily or weekly •  Schedule auto-recording daily or weekly •  Snapshot •  Replay recorded images •  Up to sixteen cameras display on Windows based Application Software Specifications of pan_CAMit IIT • Power consumption: 5V DC, ~390 mA still, 420 mA rotating • Pan Speed: 21 to 10.5 degree/second • Cable Connections:    RJ11 for phone line connection     RJ12 connector for 5V DC/90~240V AC    DB15 for RS232 for parameters setup through a Windows based software • Motion detection sensitivity: High, Medium, and Low • Transmission Speed depends on ISP connection speed. Assuming 33.6kbps upload     High Resolution (640x480): ~0.125 frames/second     Medium Resolution (320x240): ~0.5 frames/second     Low Resolution (160x120): 1~2 frames/second • Camera Specification: • CMOS Camera support Specification:     300K pixels, 1/3?     S/N Ratio: > 48dB     Gamma Correction: 0.45     Min. Illumination: <2.5 lux @ f2.0     Default Lens: (others are available as optional Lens.)     ( Ref: 3Jtech Technical Notes: Relation between Lens Angles, Distance and Identifiable Target )     Focal Length 6mm     Back Focal Length 5.8mm     Aperture F 2     Angle of View (DIA) 70 ° • Operation Environment :     Temperature: 0°C~55°C   Humidity: 85% relative at 25°C     Weight: 150g     Dimension: 10cm x 13.5cm x 15cm